How to disassemble wood slat acoustic panels?

30th August 2024 - [Rooaoo] today released an official guide on how to safely disassemble Akupanel products. This guide is designed to help users avoid unnecessary damage to equipment and the environment when disassembly is required for replacement, repair, or reinstallation by completing the disassembly process smoothly and safely.

Preparing for Disassembly to Ensure Safety

Before starting to dismantle an Akupanel product, the user should ensure that all relevant power sources are switched off to avoid electrical accidents. Prepare the necessary tools such as screwdrivers, spanners and gloves to ensure safety during operation. It is also recommended to use protective eyewear and ear muffs to protect yourself from any accidental splashes.

Step 1: Remove external components

Firstly, read the product manual carefully for the exact removal procedure. Removal of Acoustic Wood Panel's external components, such as the faceplate and protective cover, usually requires the removal of several fixing screws. Remove them carefully with the appropriate tools to avoid damaging the components. Place the removed components properly for subsequent inspection or reinstallation.

Step 2: Disconnect electrical connections

After removing the external components, perform the electrical disconnections. Depending on the specific design of the product, it may be necessary to disconnect power or signal cables. Be sure to confirm that all connections have been completely disconnected, and take care to protect cables and connectors from unnecessary damage.

Step 3: Disassembly of internal components

Be especially careful when disassembling internal components. Follow the instructions in the manual to gradually disassemble each component, such as brackets, fixtures, and internal circuit boards. Avoid strong pulling or twisting to prevent damage to internal components. Record the order of removal of each component to facilitate subsequent reinstallation.

Step 4: Cleaning and Inspection

After disassembly is complete, clean the disassembled area thoroughly. Inspect all disassembled components to ensure they are in good condition and note any parts that may need to be replaced. Clean any residue from the disassembly area to prepare it for repair or reinstallation.

Technical Support and Consultation

If any difficulties are encountered during disassembly, it is advisable to contact Wood Slat Panel's technical support team. The company offers professional technical consulting services to help users solve problems during disassembly and provide the necessary support.